![]() |
KFD Mining Trapezium Grinding Mill |
TGM series Super Demand Trapezium Mill is chiefly applied towards the powder processing of nutrient products inside industries of metallurgy, building, chemistry, along with mining etc. It can easily produce powdered from a lot more than 280 types of non-inflammable and non-explosive nutrient materials with Mohs hardness below 9.3 and humidity under 6%, such as barite, limestone, quartz, calcite, granite, kaolin, basalt, gypsum and so on. The last size can be between 80 mesh and also 425 interlock ( the finest could also be eight hundred mesh).
KFD Mining Trapezium Grinding Mill Programs:
metallurgy,building materials,substance and mining
KFD Mining Trapezium Grinding Mill PROCESSED MATERIALS:
no-flammable and also non-intense minerals with Moh’azines hardness lower than 9 along with humidity below 6%
KFD Mining Trapezium Grinding Mill Effectiveness
Compared with all the traditional grinding mill,the Ace Pressure Trapezium Grinding Mill has beneath advantages:
1. The trapezium bone roller in addition to grinding ring improve the grinding efficiency drastically. The crimper and grinding ring were created in the other way up trapezium with different diameter,which often reduce your slip rate of supplies between tumbler pigeon and grinding ring,prolong grinding time,and also improve the particular grinding efficiency;
2. With higher efficient balanced adding stress springs.Following the attributes of Raymond Mill and Underhand Suspension Mill,Super Press Trapezium Grinder has longer service lifetime. The tumbler assembly continues to be linked by the pulling rod and this levelled arises, with this radial pressure yeilding, that avoids the bulk material getting into the grinding chamber to wear down the main axis as well as the the bearings, thence the service life is going to be longer;
3. Using variable connection for connecting main figure and dust concentrator,hence the damping spring and airproof belt can reduce the vibration and also noise,and prevent the ringing as nicely;
4. There will be high desity and also high preciseness impeller;
5. There is high-productivity and power-saving centrifugal induced write fan;
6. With the impeller changing device gives more appliance. The wholesale between property and powder concentrator’azines blade front end also personal effects the delicacy of a final product.The patent technological know-how enables alter the settlement more appliance.
Technical Parameter Of Trapezium Grinding Mill :
Mm to inch conversion: 25.4millimeters=1 inch
The humidity and hardness of raw material will affect the fineness and capacity.
Item\Model | TGM100 | TGM130 | TGM160 |
Roller piece | 4 | 5 | 6 |
Roller Diameter×Height(mm) | Ф320×200 | Ф410×240 | Ф440×270 |
Ring Inner Diameter×Height(mm) | Ф980×200 | Ф1280×240 | Ф1600×270 |
Speed Of Main frame (r/min) | 130 | 103 | 82 |
Max. Input Size (mm) | <25 | <30 | <35 |
Product Size (mm) |
1.6~0.045 fineness can reach to 0.038 |
1.6~0.045 fineness can reach to 0.038 |
1.6~0.045 fineness can reach to 0.038 |
Capacity (t/h) | 3~8 | 6~15 | 9~22 |
Overall Dimension (mm) | 9910×5365×8310 | 7910×7000×9645 | 12550×5700×8355 |
Weight (t) | 16 | 26.1 | 35 |
Note:
1. Based upon limestone-grinding with 80% pass-through;
2. The final technical data are subject to the operation manual along with the machine.
Table 2:
Name | Item | Unit | Specifications & Technical Data | |||
TGM100 | TGM130 | TGM160 | ||||
Motor for main frame | Model | Y225M-4 | Y280M-4 | Y135M1-4 | ||
Power | kW | 45 | 90 | 132 | ||
Rev. | rpm | 1480 | 1480 | 1480 | ||
Motor for separator | Model | YCT200-4A | YCT200-4B | YCT225-4A | ||
Power | kW | 5.5 | 7.5 | 11 | ||
Rev | rpm | 125~1250 | 125~1250 | 125~1250 | ||
Motor for Elevator | Model | Y100L-4 | Y100L2-4 | Y112M-4 | ||
Power | kW | 3 | 3 | 4 | ||
Rev | rpm | 1420 | 1420 | 1420 | ||
Motor for Blower | Model | Y225M-4 | Y280M-4 | Y135M1-4 | ||
Power | kW | 45 | 90 | 132 | ||
REV | rpm | 1480 | 1480 | 1480 | ||
Motor for Jaw Crusher | Model | PE | 200×350 | 250×400 | 250×400 | 250×750 |
Y160M-6 | Y180L-6 | Y180L-6 | Y200M-6 | |||
Power | KW | 7.5 | 15 | 15 | 22 | |
REV | rpm | 970 | 970 | 970 | ||
Electro-Magnetic Vibrating Feeder | Model | GZ2F | GZ2F | GZ3F | ||
Power | W | 150 | 150 | 200 |
Note: The final technical data are subject to the operation manual along with the machine.